Industrial application

You are here:
  1. Home
  2. PRODUCTS
  3. PRESSURE SENSORS
  4. Industrial application
Connection
Pressure Output
Pressure Range
Pressure Type

P02 piezoresistive pressure transmitter

E-Connector: DIN75301-803A, Direct cable, M12X1, Metri-Pack 150, RK03FB
Range: 0…100 bar
Output: 0.5-4.5V ratio 5VDC, 1-5V 12 to 30VDC, 0-10V 14 to 30VDC, 4-20mA 12 to 30VDC
Type: Absolute, Relative
The P02 series pressure transmitter for almost all industries applications that provide reliable pressure even in extreme environments measurement results. The pressure transmitter combines the latest Application Specific Integrated Circuit (ASIC) and Oil-Filled piezoresistive technology, provides flexible output signals, absolute or relative (gauge) versions with measurement ranges from 0–1 to 0–100 bar. A wide variety of pressure and electrical connections are available.

Read more

PA series OEM pressure transmitter

E-Connector: Bayonet, DIN75301-803A, DIN75301-803C, Direct cable, M12X1, Metri-Pack 150, Pre-tinned pads, RK03FB, Wires 50.8mm
Range: 0…60 bar
Output: 0.5-4.5V ratio 5VDC, 0.5-2.5V ratio 5VDC, 0.5-3.5V ratio 5VDC, 1-5V 12 to 30VDC, 0-10V 14 to 30VDC, 4-20mA 12 to 30VDC
Type: Absolute, Relative
The PA series pressure transducer combines the latest Application Specific Integrated Circuit (ASIC) technology with proven piezoresistive sensors. The measuring bridge is printed directly on one side of the diaphragm by means of Thick-Film technology. The rear part of the diaphragm can be exposed directly to the medium to be measured. The 304 housing surrounds a pressure transducer designed for general use wherever a rugged, reliable pressure transducer is required.

Read more

PSC piezoresistive ceramic pressure sensor

E-Connector: Pre-tinned pads, Wires 50.8mm
Range: 0…50 bar
Output: 2.0-4.0mV/V
Type: Absolute, Relative
The PSC series pressure sensors feature a ceramic cell using the piezoresistive principle. A Wheatstone bridge is screen-printed on one side of the ceramic diaphragm via thick film technology, while the other side directly contacts the measured medium. The Al₂O₃ ceramic offers excellent chemical resistance, eliminating the need for additional protection. The monolithic design with a reinforced outer area allows O-ring mounting in housings. PSC sensors ensure reliability under temperature changes, provide precise linearity and minimal hysteresis.

Read more

PSCT piezoresistive ceramic pressure sensor

E-Connector: Pre-tinned pads, Wires 50.8mm
Range: 0…50 bar
Output: 0.5-4.5V ratio 5VDC, 0.5-2.5V ratio 5VDC, 0.5-3.5V ratio 5VDC
Type: Absolute, Relative
The PSCT pressure sensors feature a monolithic ceramic cell and operate based on the piezoresistive principle. The Wheatstone bridge is screen-printed on the ceramic cell using thick film technology, with signal conditioning electronics providing integrated amplified output. Pressure and temperature calibration is handled electronically via the on-board ASIC, with offset and span corrections for temperature variations. The sensors offer long-term stability, are EMC-compliant, and include an EEPROM for traceability and custom calibration. The Al2O3 ceramic ensures excellent resistance to aggressive media.

Read more

PSRT piezoresistive ceramic pressure sensor

E-Connector: Pre-tinned pads, Wires 50.8mm
Range: 0…50 bar
Output: 0.5-4.5V ratio 5VDC, 0.5-2.5V ratio 5VDC, 0.5-3.5V ratio 5VDC
Type: Absolute, Relative
The PSRT pressure sensors feature a monolithic ceramic cell and operate based on the piezoresistive principle. The Wheatstone bridge is screen-printed on the ceramic cell using thick film technology, with signal conditioning electronics providing integrated amplified output. Pressure and temperature calibration is handled electronically via the on-board ASIC, with offset and span corrections for temperature variations. The sensors offer long-term stability, are EMC-compliant, and include an EEPROM for traceability and custom calibration. The Al2O3 ceramic ensures excellent resistance to aggressive media.

Read more

Showing all 5 results